How to make printer not print the blue hyperlinks? -

as I m out of color inked and only have black. At this current state its missing the word(s) since there is no blue int :( Thanks.

Set it to print in grayscale, not color.

Ink is a lubricant for the print heads. Some color ink is used even if you only print in black. If you printed with a color missing, you could destroy that print head from the friction of running without ink to luricate it. That s why most printers won t allow you to print with a color missing even if you aren t using it. If you allow a color to go empty, the residual ink in the head could clog and become permanently blocked. You would never be able to print that color again. So always replace ink cartridges as soon as they are empty. Leaving your printer on takes very little power. Every so often the printer sends a signal to cycle the ink in the heads so it doesn t clog. If you turn your printer off, the next time you turn it on it will do a cleaning which wastes a lot of ink. The excess ink is soaked up by the waste pad beneath the printer. When the waste pad is full, the printer stops working. Unless you want to spend more than the cost of the printer or waste a lot of time on a messy cleanup you will end up throwing the printer out. So shutting it off actually shortens its life. If you leave the printer off for extended periods of time, the ink in the heads will clog and you will have to throw the printer away. Someone I know with a Canon (though this can happen with any inkjet) had to have the heads replaced twice within the first few months before the Canon tech told her to stop turning it off. Since then it has worked perfectly for over a year.

Are you using Word? If so you could highlight the entire page, and then press CTRL-SHIFT-F9 and it will disable all of the links and make them normal text. In addition, if you want to set your document where it will not make the links into hyperlinks as you type, you go into the settings of Word, and take off the check mark beside the box that says quot;internet and network paths with hyperlinksquot; (this would be in the autocorrect section, click the autoformat as you type tab)

select print on the document you want printed, go to properties, select rough draft on the top, and select blk cartridge only on bottom, This will enable the printer to print only in black no mater what the colors are.

just highlight the link and right click and undo hyperlink but even if u dont have color ink it shouldnt be a problem it will come out black

htt://answersyour.nhasynchro.com A very informative wezbsite, kindlhtt:/z y stay a minute in website and enter you email address for getting your answer.zz

change the color on your word document or whatever just copy and paste to Word, and change the text color to black

Go to options or preferences and switch to black printing only.

Copy and paste to Microsoft Word. For each hyper link, right click it and choose quot;remove hyperlinkquot; then print.

don t write the http://, just www, then the liky. it won t considered a quot;linkquot; then.

Options chief.

chhese!